Ask a technician

Android battery health check

Battery drains fast or the phone shuts down early? See how much of its original capacity the battery still holds and if it needs a new one. We guide you step by step. Nothing to install and nothing is uploaded.

How it works

Answer one question at a time, on the phone or on a computer with a USB cable.

It ends with the battery health in percent and if the battery needs replacing.

How we judge battery health

Good85 % or more of the design capacity
Worn80 to 84 %: fine for now, plan a new battery
Replaceunder 80 %, or the phone reports a battery fault

80 % is the line phone makers use for a worn battery.

More detail

Apple, Google and Samsung rate their batteries to keep about 80 % of the original capacity after a set number of full charge cycles. The EU rules for phones sold from June 2025 ask for at least 80 % after 800 cycles. Below that the phone runs out sooner and may shut down under load. A battery that is swollen, hot or leaking needs replacing whatever the number says.

What each way can read

WayNeedsReads
On the phone itselfAny browserWhat the phone's own Settings show, typed in by you.
Computer + USB cableChrome or Edge, USB debugging on the phoneHealth %, full-charge and design capacity, cycles, temperature, voltage, the phone's own health flag. Anything a phone doesn't share is shown as "not available on this phone".
Another phone + OTG cableChrome on a second Android phoneThe same as with a computer.

Privacy

The check only reads. Nothing is changed on the phone, sent or stored.

Free, private, built to keep devices alive

✓ No ads✓ No cookies✓ Nothing uploaded✓ Free

In 15 years at the bench we saw too many good devices go in the bin because nobody found the real fault. Our Hardware Specialist and Senior Repair Technicians built these tools so more devices get fixed instead of thrown away. If they helped you, a review helps the next person find them, and your support pays for the next fix.

> goal: Less e-waste · Greener Earth

We find the real fault before parts are replaced, so fewer working batteries, boards and devices end up as e-waste.